Mohawk Finishing Products Liquid Wool-Lube Rubbing Lubricant, M720-1365, 16 oz

I tried this with steel wool to rub out a finish. My steel wool results were not great with 0000 wool – scratches too visible. However, I used a dab of this with water and 1500 grit sand paper, just dribbling the solution along my polyurethane table top, and it worked great – very uniform wet sanding. I did have one application that was very uneven sanding, but I came to realize that I had used too much of the wool lube and that caused the sandpaper to glide instead of cutting/sanding. I get that you can use various detergents to do wet sanding, but this worked great for me, and I had never had it look good before. I followed up the 1500 grit wet sand with the 4F pumice and paraffin oil, and then rottenstone and paraffin oil.

Loved the smooth as glass finish on the walnut. This steel wool lube is just that. It allows the steel wool to “cut” and smooth the surface without leaving fine scratch marks. Very happy with it. I don’t know what the proprietary formula is of the lube but it works as intended.

Works well. Good value.

Slick product….